Tin Bronze Hollow Bar
C95800(CuAl10Ni5Fe5) Nickel Aluminum bronze is typcial applications Bearings, Pawl, Worm Gears, Machine Parts, Spur Gears, Heavily Loaded Worm Gears, Pump Parts, Landing Gear Parts, Valve Bodies, Valve Guides, Valve Seats, Bearing Segments for the Steel Industry, Pressure Blocks for the Steel Industry, High Strength Clamps, Bushings, Valves, Gears.
Description
| Bronze Bushing Technical Specifications Table | ||
| Category | Specification | Details / Typical Values |
| Common Name | / | Bronze Bushing, Bronze Sleeve Bearing, Bronze Plain Bearing |
| Common Alloys | C93200 (SAE 660) | Cu 81-85%, Sn 6.5-7.5%, Pb 6.0-8.0%, Zn 1.5-4.0%. Most common general purpose bearing bronze. |
| C93700 (SAE 40) | Cu 80-85%, Sn 5.0-7.0%, Pb 8.0-10.0%, Zn 2.0-4.0%. High lead content for excellent embeddability. | |
| C95400 (Aluminum Bronze) | Cu 83-87%, Al 10.0-11.5%, Fe 3.0-5.0%. High strength and wear resistance. | |
| C86300 (Manganese Bronze) | Cu 60-66%, Zn 22-28%, Mn 2.5-5.0%, Fe 2.0-4.0%. Very high strength and hardness. | |
| Chemical Composition (C93200) | Copper (Cu) | 81.0 - 85.0 % |
| Tin (Sn) | 6.5 - 7.5 % | |
| Lead (Pb) | 6.0 - 8.0 % | |
| Zinc (Zn) | 1.5 - 4.0 % | |
| Physical Properties (C93200) | Density | 8.93 g/cm³ (0.323 lb/in³) |
| Melting Point (Liquidus) | ~1000°C (~1830°F) | |
| Thermal Conductivity | 59 W/(m·K) | |
| Coefficient of Thermal Expansion | 18.0 μm/m·K (20-300°C) | |
| Mechanical Properties (C93200) | Condition | Tensile Strength |
| As-Cast | 35 ksi (240 MPa) | |
| Hardness | Brinell Hardness (HB) | |
| Maximum PV | Static | |
| Standard Dimensions | Inner Diameter | Range: 3mm (0.125") to 500mm (20") |
| Wall Thickness | Range: 1mm (0.040") to 50mm (2.0") | |
| Length | Range: 5mm (0.200") to 300mm (12") | |
| Surface Properties | Surface Finish | Ra Value |
| Standard | 1.6-3.2 μm | |
| Precision | 0.8-1.6 μm | |
Advantage
High density
Corrosion resistance
Good thermal conductivity
Health and Environmental Protection
Good conductivity
Easy to process
Detailed Information
Premium Brass Material
Excellent Corrosion Resistance
Electrical&Thermal Conductivity
East To Cut
Production Process
1.Electrolytic Copper Casting
2.Hot Forming
3.Cold Rolled
4.Coil Rolled Flat Into Plate
5.Coated
6.Cut Into Copper Strips
7.Copper Coil
8.Copper Plate
9.Copper Strip
10.Brass Plate
