5052 Aluminum Coil
- Alloy Group: 5XXX
- Principal Alloying Element: Magnesium
- Group: Common Alloys
Description
Aluminum 5052 General Description:
What is aluminum 5052?
Aluminum 5052 is an aluminum alloy with magnesium as the primary alloying element, supplemented with a small chromium addition. It has good formability when in the fully soft, annealed temper and can be work-hardened to fairly high strength levels. It is commonly used in a multitude of engineering applications.
Chemical Composition Limits:
Compositions are listed as weight percent. Limits are given as a maximum unless indicated as a range.
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others-Each | Others Total | Al | |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | 0.10 | – | 0.05 | 0.15 | Remainder |
Composition according to Aluminum Association.
Typical Mechanical Properties Data Of Aluminum 5052:
The following typical aluminum 5052 properties are not guaranteed since in most cases they are average for various sizes and methods of manufacture and may not be exactly representative of any particular product or size. The data is intended for comparing alloys and tempers and should not be used for design purposes.
Source: Aluminum Standards & Data and United Aluminum data base
| Alloy-Temper | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation (%) |
| 5052-O | 28 | 13 | 20 |
| 5052-H34/H24 | 38 | 31 | 8 |
| 5052-H38/H28 | 42 | 37 | 3 |
